UNIKS EV Check - Test adapter for EV charging station

EV CHECK adapter for checking electric vehicle charging stations. UNIKS EV CHECK simulates the presence of an electric vehicle connected to the EV charging column, allowing you to check its functionality and electrical safety.

Features:

• Allows you to test each charging point.
• Connects to the station without having to open and tamper with the station itself.
• Connects exactly like a vehicle during charging; this way it monitors the entire system.
• Simulates the state of an electric vehicle in all CP and PP charging phases (ventilated and non-ventilated)
• Type 2 EV connector
• Connection for MONITORING the PWM OUTPUT of the charging column relating to the A, B, C and ERROR states
• To perform electrical safety tests EVCHECK is equipped with a SCHUKO socket or L1-L2-L3-N and Pe inputs to connect your test instrument.

Functions:

• PE Pre-test
• PP Simulation NC / 13A / 20A / 32A / 63A
• CP States:
  • A (Electric vehicle not connected)
  • B (Electric vehicle connected, not ready to charge)
  • C (Electric vehicle connected, ventilation not required, ready to charge)
  • D (Electric vehicle connected, ventilation required, ready to charge)
• CP Error “E”
• PE error (ground fault)
• CP Outputs (for test purposes only) Measuring terminals L1, L2, L3, N and PE
• Mains socket Max 250V, CAT II 300 V, max permissible current 10 A.
• CP signal output terminals Approx. ±12V, CAT 0 (under normal conditions).

Specifications:

• Input voltage Up to 250V (single phase system) / up to 430V (three phase system), 50/60Hz, max 10A.
• Type 2 test cable AC charging mode 3, suitable for IEC62196-2 type 2 socket or fixed cable with vehicle connector (Type 2, 7P 3-phase).
• CAT III 600V
• IP rating: IP54
• PROTECTION CLASS II
• Working Temperature: 0...40°C
• Socket Protector Fuse: 10A/250V, 5x20mm