|
Enhance your remote control setup with this powerful 1-channel receiver, designed for reliable and secure 433MHz operation. With one included remote, you can control devices effortlessly, whether you’re managing gates, doors, lighting, or other automated systems. The remote easily pairs with the receiver, providing flexible control options right out of the box.
Pairing: Hold the button on the receiver until the LED turns on, then press a button on the remote. When the LED blinks fast it has been paired successfully. To reset, hold the button on the receiver until the LED turns on and blinks fast.
Features:
- Receiver:
- 1 channel relay switch
- Can be paired with remote
- Different output methods: Momentary, toggle, latched
- Transmitter (remote):
- 1 channel
- 2 is included - more can be paired with the receiver
- With A / B-buttons
- Output methods:
- Momentary: Activates only while the button is pressed - ideal for quick actions
- Toggle: Switches devices on or off with each press on the same button - perfect for lights or switches
- Latched: Turns the device on or off with each press - instead of the same button, ON and OFF are split between 2 buttons
Specfications:
- Supply voltage:
- Receiver: 12Vdc
- Transmitter: 1 x 12V LR23 battery (not included, see accesories)
- Relay contact voltage: 1...250Vac
- Max. relay contact current: 10A
- Relay channels: 1
- Working frequency: 433MHz
- Receiver sensitivity: -105db
- Output states:
- Momentary: Put the jumper on M&G
- Toggle: Put the jumper on T&G
- Latced: Remove jumper or put on any one pin
- Wireless range: Up to 30m (at line of sight)
- Dimensions:
- Reciever: 40 x 37 x 26mm
- Transmitter: 52 x 37mm
- Working temperature: -10...60°C
User Instructions:
- Learning/Pairing: The module can learn more than 12 remote controls.
1. Press the learning button on the receiver board.
2. Push a button on the remote control.
3. The LED indicator on the receiver will flash and then turn off. After about 3 seconds, the LED will turn on again, indicating successful learning.
- Removing/Cleaning Codes: Press and hold the learning button for about 8 seconds. The indicator will turn on and then off, which means all stored information has been successfully removed.
- Working Modes: The module supports multiple working modes, configured by pressing the learning button a specific number of times:
- Momentary Mode: (Press the learning button once) The relay is active only while the remote button is pressed.
- Toggle Mode: (Press the learning button twice) Press the remote button once to turn the relay on, and press it again to turn it off.
- Latching Mode: (Press the learning button thrice) One button on the remote turns the relay on, and another button turns it off.
- Time Delay: (Press the learning button 4, 5, or 6 times) The relay will stay on for a set time (e.g., 5, 10, or 15 seconds) before turning off automatically.
|